loading
The Motor Blade Aluminum for Building Lift Motor is a lightweight, high-performance component engineered to optimize airflow and cooling efficiency in elevator and hoist motors. Constructed from high-strength aluminum alloy (6061-T6), these blades offer a 30% weight reduction compared to traditional steel blades while maintaining exceptional thermal conductivity—critical for dissipating heat generated by continuous motor operation .
| Availability: | |
|---|---|
| Quantity: | |
Designed with aerodynamic profiles (validated through computational fluid dynamics simulations), the blades generate consistent airflow ranging from 500–2,000 m³/h at low noise levels (≤60 dB), ensuring reliable cooling in high-rise building elevators where quiet operation is essential. Their anti-vibration design minimizes resonance with motor components, reducing wear on bearings and extending overall motor service life by up to 20% .
The 6061-T6 aluminum alloy blades weigh 40% less than steel alternatives, reducing motor inertia and energy consumption by 10–15%. This is particularly valuable for elevator systems requiring rapid acceleration and deceleration, as it lowers strain on motor components and improves energy efficiency .
The anodized surface treatment creates a protective oxide layer (10–15 μm thick) that resists moisture, chemicals, and UV radiation. Salt spray testing confirms resistance to 500+ hours without corrosion, making the blades suitable for coastal buildings, humid environments, and areas with high air pollution .
Blade profiles: Axial (for high airflow) or radial (for pressure optimization) designs to match specific cooling requirements.
Mounting options: Direct fit for NEMA 56C–449T and IEC 63–315 motors; custom adapters available for non-standard models.
Colors: Powder-coated finishes in RAL colors to match equipment aesthetics or brand guidelines.
Building Elevators: Cooling traction motors and gearboxes in high-rise residential and commercial elevators.
Construction Hoists: Ventilating drive motors in tower cranes, material lifts, and passenger hoists.
Industrial Fans: Enhancing airflow in HVAC systems, motor enclosures, and manufacturing facility ventilation.
Q: What is the maximum operating temperature?
A: The blades withstand continuous operation at 80°C. For higher temperatures (up to 120°C), we offer ceramic-coated variants that provide enhanced heat resistance.
Q: Can the blades be retrofitted to existing motors?
A: Yes, most models are compatible with standard NEMA and IEC motors. Provide your motor’s model number, shaft diameter, and mounting dimensions, and our technical team will confirm compatibility or design a custom adapter.
Q: What is the lifespan of the blades?
A: Under normal operating conditions, the blades have a service life of 5–8 years. We recommend quarterly visual inspections and annual cleaning to remove dust buildup, which can reduce airflow efficiency.
Q: Are explosion-proof versions available?
A: Yes, ATEX-certified blades with non-sparking properties (made from aluminum bronze) are available for hazardous environments, meeting Ex II 2D standards for dust zones.
Designed with aerodynamic profiles (validated through computational fluid dynamics simulations), the blades generate consistent airflow ranging from 500–2,000 m³/h at low noise levels (≤60 dB), ensuring reliable cooling in high-rise building elevators where quiet operation is essential. Their anti-vibration design minimizes resonance with motor components, reducing wear on bearings and extending overall motor service life by up to 20% .
The 6061-T6 aluminum alloy blades weigh 40% less than steel alternatives, reducing motor inertia and energy consumption by 10–15%. This is particularly valuable for elevator systems requiring rapid acceleration and deceleration, as it lowers strain on motor components and improves energy efficiency .
The anodized surface treatment creates a protective oxide layer (10–15 μm thick) that resists moisture, chemicals, and UV radiation. Salt spray testing confirms resistance to 500+ hours without corrosion, making the blades suitable for coastal buildings, humid environments, and areas with high air pollution .
Blade profiles: Axial (for high airflow) or radial (for pressure optimization) designs to match specific cooling requirements.
Mounting options: Direct fit for NEMA 56C–449T and IEC 63–315 motors; custom adapters available for non-standard models.
Colors: Powder-coated finishes in RAL colors to match equipment aesthetics or brand guidelines.
Building Elevators: Cooling traction motors and gearboxes in high-rise residential and commercial elevators.
Construction Hoists: Ventilating drive motors in tower cranes, material lifts, and passenger hoists.
Industrial Fans: Enhancing airflow in HVAC systems, motor enclosures, and manufacturing facility ventilation.
Q: What is the maximum operating temperature?
A: The blades withstand continuous operation at 80°C. For higher temperatures (up to 120°C), we offer ceramic-coated variants that provide enhanced heat resistance.
Q: Can the blades be retrofitted to existing motors?
A: Yes, most models are compatible with standard NEMA and IEC motors. Provide your motor’s model number, shaft diameter, and mounting dimensions, and our technical team will confirm compatibility or design a custom adapter.
Q: What is the lifespan of the blades?
A: Under normal operating conditions, the blades have a service life of 5–8 years. We recommend quarterly visual inspections and annual cleaning to remove dust buildup, which can reduce airflow efficiency.
Q: Are explosion-proof versions available?
A: Yes, ATEX-certified blades with non-sparking properties (made from aluminum bronze) are available for hazardous environments, meeting Ex II 2D standards for dust zones.
| Model | ZLP500 | ZLP630 | ZLP800 | ZLP1000 | ||
| Material | Steel/Aluminum | |||||
| Rated Capacity | KG | 500 | 630 | 800 | 1000 | |
| Rated Lifting Speed | m/min | 9.3 | 9.3 | 8.2 | 8.2 | |
| Platform Dimension(L×W×H) | mm | 5000×690×180 | 6000×690×1180 | 7500×690×1180 | 7500×690×1180 | |
| Suspension Mechanism | Front Beam Overhang | mm | 1300 | 1300 | 1300 | 1300 |
| Height Of Front Beam | mm | 1100-1600 | 1100-1600 | 1100-1600 | 1100-1600 | |
| Hoist | Type | LTD5.0 | LTD6.3 | LTD8 | LTD10 | |
| Rated Lifting Force | KN | 5 | 6.3 | 8 | 10 | |
| Motor Power | KW | 1.1 | 1.5 | 1.8 | 2.2 | |
| Diameter Of Wire Rope | mm | 8.3 | 8.3 | 8.6 | 9.1 | |
| Voltage | V | Customized | Customized | Customized | Customized | |
| Safety Lock | Type | LDF30 | LDF30 | LDF30 | LDF30 | |
| Allow The Impact Force | KN | 30 | 30 | 30 | 30 | |
| Angle Adjustment Range | 3-11 | 3-11 | 3-11 | 3-11 | ||
| Weight | Suspension Platform | KG | 264 | 300 | 370 | 370 |
| Suspension Mechanism | KG | 250(no-inciuding counterweight) | 250(no-inciuding counterweight) | 250(no-inciuding counterweight) | 250(no-inciuding counterweight) | |
| Hoist | KG | 48*2 | 48*2 | 52*2 | 52*2 | |
| Satey Lock | KG | 5*2 | 5*2 | 5*2 | 5*2 | |
| Control Box | KG | 15 | 15 | 15 | 15 | |
| Countweight | KG | 40*25 | 40*25 | 40*25 | 40*25 | |
| Wire Rope | Type | 4×31Fi+pp-φ8.3mm(4pcs) | 4×31Fi+pp-φ8.3mm(4pcs) | 4×31Fi+pp-φ8.6mm(4pcs) | 4×31Fi+pp-φ9.1mm(4pcs) | |
| Cable | Type | 3×2.5+2×1.5YC-5+1(1pcs) | 3×2.5+2×1.5YC-5+1(1pcs) | 3×2.5+2×1.5YC-5+1(1pcs) | 3×2.5+2×1.5YC-5+1(1pcs) | |
| Model | ZLP500 | ZLP630 | ZLP800 | ZLP1000 | ||
| Material | Steel/Aluminum | |||||
| Rated Capacity | KG | 500 | 630 | 800 | 1000 | |
| Rated Lifting Speed | m/min | 9.3 | 9.3 | 8.2 | 8.2 | |
| Platform Dimension(L×W×H) | mm | 5000×690×180 | 6000×690×1180 | 7500×690×1180 | 7500×690×1180 | |
| Suspension Mechanism | Front Beam Overhang | mm | 1300 | 1300 | 1300 | 1300 |
| Height Of Front Beam | mm | 1100-1600 | 1100-1600 | 1100-1600 | 1100-1600 | |
| Hoist | Type | LTD5.0 | LTD6.3 | LTD8 | LTD10 | |
| Rated Lifting Force | KN | 5 | 6.3 | 8 | 10 | |
| Motor Power | KW | 1.1 | 1.5 | 1.8 | 2.2 | |
| Diameter Of Wire Rope | mm | 8.3 | 8.3 | 8.6 | 9.1 | |
| Voltage | V | Customized | Customized | Customized | Customized | |
| Safety Lock | Type | LDF30 | LDF30 | LDF30 | LDF30 | |
| Allow The Impact Force | KN | 30 | 30 | 30 | 30 | |
| Angle Adjustment Range | 3-11 | 3-11 | 3-11 | 3-11 | ||
| Weight | Suspension Platform | KG | 264 | 300 | 370 | 370 |
| Suspension Mechanism | KG | 250(no-inciuding counterweight) | 250(no-inciuding counterweight) | 250(no-inciuding counterweight) | 250(no-inciuding counterweight) | |
| Hoist | KG | 48*2 | 48*2 | 52*2 | 52*2 | |
| Satey Lock | KG | 5*2 | 5*2 | 5*2 | 5*2 | |
| Control Box | KG | 15 | 15 | 15 | 15 | |
| Countweight | KG | 40*25 | 40*25 | 40*25 | 40*25 | |
| Wire Rope | Type | 4×31Fi+pp-φ8.3mm(4pcs) | 4×31Fi+pp-φ8.3mm(4pcs) | 4×31Fi+pp-φ8.6mm(4pcs) | 4×31Fi+pp-φ9.1mm(4pcs) | |
| Cable | Type | 3×2.5+2×1.5YC-5+1(1pcs) | 3×2.5+2×1.5YC-5+1(1pcs) | 3×2.5+2×1.5YC-5+1(1pcs) | 3×2.5+2×1.5YC-5+1(1pcs) | |
